Innolite II 1.8 SATA SSD 4GB

Product Description

InnoLite II 1.8 SATA SSD is standard 7+15 pin SATA interface could support most of the platform with standard SATA port. InnoLite II 1.8 SATA SSD operates under SATA II (3.0Gb/s) protocol with good performance, the sustain read/write can reach up to 120/40MB per second (max).

InnoLite II 1.8 SATA SSD is also suitable in industrial field. It effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD). InnoLite II 1.8 SATA SSD complies with ATA protocol, no additional drivers are required, and the INNOLITE II 1.8 SATA SSD can be configured as a boot device or data storage device.

Specification

• – Connector Type: Standard 7+15 Pin SATA Connector
  – Flash Type MLC(Single Level Cell)
  – Transfer Mode SATA II 3.0 Gb
  – Sustained R/W Performance Read: 110 MB/sec(max.) & Write: 50 MB/sec(max.)
  – DC Input +5V DC 5%
  – Power Consumption(Max.) Read: 190 mA Write: 230 mA Idle: 140mA
  – Operating Temp. 00C-+700C(Standard Grade)
  – Storage Temp. -550C-+950C
  – Humidity Relative Humidity: 10-95%,non-condesing
  – Flash Endurance 3,000 program/erase cycles
  – MTBF >3,000,000 hours
  – Dimension(WxLxH) 69.85mm x 50.0mm x 9.0mm
  – Weight 57 5g
  – Vibration 20G, 7 Hz to 2K Hz, , 3 axes
  – Shock 1500G, Duration:10ms, axes
• – Certification CE,FCC,RoHS

Additional information